Housed Motors

For high-quality servo applications
View Portfolio

Housed Motors for High-Quality Servo Applications

The housed motors and servo motors from drive specialist MACCON are suitable for demanding servo applications in industry and automation technology.

MS Series

MSP Series

AKM2G
Servo Motor

AKMH Stainless Steel Series

ST Torque Motors

Brushless DC Motors

MS Series of Low-Voltage Brushless Servo Motors

Our MS synchronous servo motors are brushless three-phase motors for high-quality servo applications in industry and automation technology. Their key features include:

  • 3-phase, PM brushless
  • 6-pole design
  • Maximum dynamics
  • Rated torque from 0.1 to 115 Nm
  • Operating voltage from 24–650 VDC, with various winding options
  • Integrated encoder, 2048 lines and Hall-effect simulation
  • Optionally available with absolute encoder, single-turn or multi-turn, EnDat or Hiperface
  • Alternatively available with resolver
  • Smooth shaft, optionally with keyway
  • Protection rating IP64
  • Optionally IP65 / IP67 with or without shaft seal
  • Flange connector, Intercontec, MS1 with 0.5 m cable plus connector
  • Optional open cable
  • Thermal motor protection with PTC
  • Optional thermal switch 145 °C, KTY or NTC
  • Options: 24 V brake, gearbox, special windings and many others
  • Also available as a frameless kit version, see datasheet
View MS Series

MSP Series of Brushless Servo Motors with Pole Winding

Our MSP synchronous servo motors are the further development of the MP servo motors. As brushless three-phase motors with pole winding, they are suitable for high-quality servo applications in industry and automation technology.

The MSP motors are characterized by a particularly compact design. From frame size MSP3 upwards, these motors feature a 10-pole design, resulting in lower cogging torque and therefore smoother operation.

Key features of the MSP servo motors include:

  • 3-phase, PM brushless
  • 6-pole design / 10-pole design from frame size 3
  • Maximum dynamics
  • Rated torque from 0.28 to 24 Nm
  • Operating voltage from 120–650 VDC, with various winding options
  • Integrated encoder, 2048 lines and Hall-effect simulation
  • Optionally available with 2-pole resolver
  • Optionally available with absolute encoder, single-turn or multi-turn, EnDat or Hiperface
  • Smooth shaft, optionally with keyway
  • Protection rating IP64
  • Optionally IP65 / IP67 with or without shaft seal
  • Flange connector, Intercontec
  • Optional rotatable angled connectors or open cable
  • Thermal motor protection with PTC
  • Optional thermal switch 145 °C, KTY or NTC
  • Options: 24 V brake, gearbox and many others
View MSP Series

AKM2G Servo Motor

AKM2G represents the latest evolution of the industry-leading AKM motor family. With significant torque increases in the same frame size, OEMs can achieve substantial performance improvements without changing the motor mounting or requiring additional space in the machine.
View AKM2G Servo Motors

Stainless Steel Food Grade AKMH Series

The AKMH Series is built to withstand the most rigorous of washdown regimens. The combination of the AKMH’s IP69K construction and corrosion resistant materials make for a servo motor that will last the life of your machine.
View AKMH Series

ST Torque Motors

The ST torque motor range with high-energy iron-neodymium permanent magnets was developed for direct-drive servo mechanisms without gearboxes in highly dynamic automated production machines. ST torque motors are characterized by the integration of the active components of STK motor kits – rotor and stator – up to a diameter of 300 mm into a housing with bearing shields, ball bearings, encoders or resolvers, hollow shaft, blind shaft or solid shaft, as well as cable or connector interfaces. ST torque motors therefore offer the same advantages as STK motor kits in terms of compactness, torque-to-weight ratio, volume-to-weight ratio, precision and reliability. They enable machine manufacturers to integrate a motor in cases where direct integration into the machine itself is not desired or possible. This is particularly relevant for machines without an integration frame, such as carousels or test benches. In addition, ST torque motors offer great potential for applications in cyclic machines with low inertia, as the motors provide high peak torques while maintaining reduced rotor inertia.
View ST Torque Motors

Brushless DC Motors

Our product portfolio includes a broad selection of standard BLDC motors in NEMA frame sizes, servo motors, frameless BLDC motors and slotless/ironless BLDC motors. Our BLDC motors are developed and manufactured using state-of-the-art technology and innovative production methods to ensure maximum quality and performance. In addition, we offer motorized drive wheel assemblies used in a wide range of AGV and AMR applications, including robotics and material handling. Whether standard motor or custom solution, Lin Engineering has the expertise and resources to meet your requirements.
View Brushless DC Motors

Contact

Do you have any questions or would you like some advice?

Please feel free to send us your technical requirements or questions in writing using the contact form linked below. We will get back to you as soon as possible after receiving your enquiry.

Contact us

Kontaktieren Sie uns!

Get in touch!