TORQUE INSERTS - FRICTION HINGES FOR INTEGRATION
The constant torque hinges on this page are prepared to be integrated into the rotating axis which means they become integral part of the customer mechanics.
Special care has to be taken in the mounting area. The friction hinges provide a lot of torque in a small package which has to be supported by a fairly small mounting area. So this area has to be designed in a way that the torque can be supported without distortion or material breakage due to fatigue.
- 4 models
- torque from 0.2 to 8Nm per hinge
- TI200 series provides two torque levels, depending on direction (one direction reduced to 65%)
In the table on the right side you can find the various models with data, pictures and links to the according datasheets and drawings.
Torque Insert TI100 Serie (einbaufertig) (Reell Inc.)
Torque Insert TI200 Serie (komplette Integration) (Reell Inc.)
| Bezeichnung | Bild | Stellwinkel | Drehmoment Nm |
Bemerkung |
| TI100_1018 (früher MH20-0yy) 20-0yy 
Zeichnung 2D (pdf)
Zeichnung 3D (igs) |
 |
360° | 0,2 0,4 0,6 0,8 1,0 1,2 |
- bis 10.000 Zyklen - Drehmoment +/-20% ... +/-45% - Rückfedern < 1° - Clip-Technologie |
| TI100_1523 (früher MH40-0yy) 40-0yy
Zeichnung 2D (pdf)
Zeichnung 3D (igs) |
 |
360° | 1,4 1,8 2,2 2,6 3,0 3,4 3,8 4,2 |
- bis 10.000 Zyklen - Drehmoment +/-20% - Rückfedern < 1° - Clip-Technologie |
| TI200_1417 7-0yy
Zeichnung 2D (pdf)
Zeichnung 3D (igs) |
 |
360° | CCW / CW 1,5 / 0,94 2,0 / 1,25 2,5 / 1,56 3,0 / 1,88 3,5 / 2,19 |
- bis 10.000 Zyklen - Drehmoment +/-20% - Rückfedern < 1° - Clip-Technologie - unterschiedliches Drehmoment pro Drehrichtung |
| TI200_1444 80146-0yy
Zeichnung 2D (pdf)
Zeichnung 3D (igs)yy = Drehmoment in Nm x 10 |
 |
360° | CCW / CW 5,0 / 3,13 6,0 / 3,75 7,0 / 4,38 8,0 / 5,00 |
- bis 10.000 Zyklen - Drehmoment +/-20% - Rückfedern < 1° - Clip-Technologie - unterschiedliches Drehmoment pro Drehrichtung |
| type | picture | angle | torque Nm |
remark |
| TI100_1018 (former MH20-0yy) 20-0yy drawing 2D (pdf) drawing 3D (igs) |
|
360° | 0.2 0.4 0.6 0.8 1.0 1.2 |
- up to 10,000 cycles - torque +/-20% ... +/-45% - spring back < 1° - clip technology |
| TI100_1523 (former MH40-0yy) 40-0yy drawing 2D (pdf) drawing 3D (igs) |
|
360° | 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 |
- up to 10,000 cycles - torque +/-20% - spring back < 1° - clip technology |
| TI200_1417 7-0yy drawing 2D (pdf) drawing 3D (igs) |
|
360° | CCW / CW 1.5 / 0.94 2.0 / 1.25 2.5 / 1.56 3.0 / 1.88 3.5 / 2.19 |
- up to 10,000 cycles - torque +/-20% - spring back < 1° - clip technology - one direction with reduced torque |
| TI200_1444 80146-0yy drawing 2D (pdf) drawing 3D (igs)yy = torque in Nm x 10 |
|
360° | CCW / CW 5.0 / 3.13 6.0 / 3.75 7.0 / 4.38 8.0 / 5.00 |
- up to 10,000 cycles - torque +/-20% - spring back < 1° - clip technology - one direction with reduced torque |