TUBULAR SOLENOIDS

Tubular solenoids provide fairly flat force stroke characteristics due to their tubular shape and their plunger geometry; they are well suited for applications asking for long strokes but not highest forces.

The principal characteristics can be listed as follows:

  • stroke up to 30mm (depending on type)
  • optimised for long strokes
  • holding force up to 80N (in end position, energised)
  • high life time: up to >30 million cycles
  • standard versions with 11 to 38mm diameter
  • pull and push versions

Another version are the so called Cold Forged Tubular Solenoids. This manufacturing technology allows very cost effective production for high quantities. The metal body is formed by very high pressing forces. This modern production method also reduces mechanical stress for the metal compared to conventional machining, which helps to increase life time. Please contact us for further information.

 

Tubular Solenoids (G+)
" Tubular" Solenoids
Modell stroke
mm		 holding force
N		 size
mm		 weight
g		 Data-
sheet		 drawing
3D
  10% ED* 100%ED* D x H overall plunger .pdf .igs
133-L 3 5 0.9 13 x 12 15 4
133-H 3 5 0.9 13 x 12 15 2
130-L 12 7 3 13 x 27 24 5
130-H 12 7 3 13 x 27 24 4
170-L 12 7 3.5 17 x 27 39 5
170-H 12 7 3.5 17 x 27 39 4
190-L 13 18 8 19 x 40 82 20
190-H 13 18 8 19 x 40 82 16
253-L 12 35 15 25 x 30 125 32
253-H 12 35 15 25 x 30 125 19
250-L 14 38 22 25 x 51 188 44
250-H 14 38 22 25 x 51 188 35
320-L 18 70 35 32 x 58 299 54
320-H 18 70 35 32 x 58 299 53
380-L 30 80 55 38 x 64 497 95
L = pull, H = push
*ED is duty cycle as a %-value, the additional limitation is the max. on time per cycle!